Finishing a Bathroom Remodel? Find out How to Evaluate For Tile

How to measure for tile when completing a bathroom remodel

Envision this, you are considering of remodeling a lavatory and presently have an founded budget. You are at a tile shop and see a tile sample you like. The selling price of the tile is $ 5.00 a sq. foot. How do you know if this $ 5.00 a sq. foot tile is inside your budget? In addition to the tile, how substantially ought to I budget for the grout and sealer?

In a modern short article I delivered facts on the different sorts of tiles that are accessible for your bathroom remodel. Now it is time to study how to measure for your tiling task and estimate the expense for your tiles and relevant tiling provides.

There are different sorts of tile you will have to have to tile your lavatory:

  • Area Tile
  • Trim Tile

Area tile is the principal entire body of tile for your remodeling task. For case in point, if you are tiling your shower, the industry tile is the tile on the partitions of your shower. The industry tile addresses the biggest spot of ​​your tiling task. A prevalent size for industry tile is 12 inches by 12 inches. Area tile is marketed by sq. footage, so you have to have to just take the spot for the industry tile and estimate the sq. footage.

Trim tile is divided into two types:

  • Accent trim tile (to be established in with the industry tile)
  • Border trim tile (to end off the industry tile)

How to Evaluate

Enable&#39s go via an case in point to aid you go via the tile measuring course of action. In this case in point, we are going to set up tile for a bathtub with a shower encompass.

For a bathtub with a shower encompass, you will have to have tile for the 3 partitions. The tile will be mounted to a top of six ft (six &#39) earlier mentioned the tub deck.

The 1st wall is 5 ft large. The two conclusion partitions are each individual 3 ft large. To determine the tile sq. footage, you have to have to measure the width of each individual of the 3 partitions and multiply it by the top of your shower encompass.

Enable&#39s start off measuring the 1st wall:

  • 5 &#39wide (60 inches) by six&#39 ft tall. 5 X six = thirty sq. ft.

Then you have to have to measure the two conclusion partitions:

  • 3 &#39feet deep (36 “) X six&#39 tall. 3 X six = eighteen Sq. ft.
  • 3 &#39feet deep (36 “) X six&#39 tall. 3 X six = eighteen Sq. ft.

Then, you have to have to incorporate the measurements of all 3 partitions alongside one another:

  • 66 sq. ft of industry tile is desired for the shower encompass.

I propose to my customers to account for a twenty% waste component when location tile. Retain in thoughts the tile could be discontinued, the tile could be on back again buy for quite a few weeks, or many other challenges could occur if you operate shorter of tile when remodeling your lavatory. An added twenty% of tile for 66 sq. ft equals an added 13.2 sq. ft of tile. I recommend rounding up the tile to 14 added sq. ft for the waste component.

  • 66 sq. ft + 14 sq. ft = eighty sq. ft of industry tile.

Upcoming you have to have to measure for the trim pieces to end the edges of the tile. The trim pieces will end off the edge of the tile operating horizontally on each individual of the two conclusion partitions, and the leading of the tile on all 3 partitions operating vertically. Trim pieces are marketed in linear ft. Trim pieces normally range from 8 inches to 12 inches in length.

In our case in point, the just one wall is 5 ft in length and the two conclusion partitions are each individual 3 ft in length. The tile is established six ft earlier mentioned the leading of the tub deck the tub is 14 inches tall. Again, I normally spherical up the measurement to the next maximum foot measurement. In this situation, I would spherical 14 inches up to the next maximum foot measurement, which is 24 inches (2 ft). Add these two measurements alongside one another:

  • six &#39+ 2&#39 (14 “rounded up) = 8 &#39

Recall, you have to end off the edge of the tile on the two conclusion partitions, so you have to have to double this measurement:

  • 8 &#39+ 8&#39 = 16 &#39

In this case in point, you have to have 16 &#39(linear ft) of trim tile to end off the edge of the tile for each individual of the two conclusion partitions.

Upcoming, you have to have to measure for the leading of the tile in the shower encompass. This is straightforward because we presently know that the just one wall is 5 ft in length and the two conclusion partitions are each individual 3 ft in length:

  • 5 &#39+3&#39 +3 &#39= eleven&#39

And lastly, you incorporate up the two measurements to determine the linear ft of trim tile that is have to have for the shower encompass.

  • 16 &#39+ eleven&#39 = 27 &#39of trim tile

In addition to the tile, you must budget for grout and sealer. I budget $ one.00 for every sq. foot of industry tile getting requested to deal with the price of the grout and sealer. This approach is a swift and straightforward way to establish a budget for your tile and to stay inside your all round bathroom remodel budget.

It is now time to measure the spot you are going to set up tile on. These measurements will let you to know the expense of any tile you are considering of installing in your lavatory.